Home > Woodcraft and Turning > Pens and Pen Making
Pen Making
Hand turned wood pens and pen blanks for the discerning pen maker:
- Hand Turned Gift Pens:
- JbT Pre-Cut Pen Blanks:
- Pre-Cut Standard
(18mm square x 57mm x 2), - Pre-Cut Fat
(20mm+ square x 57mm x 2) and - Pre-Cut Slimline
(15mm square x 57mm x 2). - Full length Pen Blanks:
- Standard
(18mm square x 57mm x 2), - Fat
(20mm+ square x 57mm x 2) and - Slimline
(15mm square x 57mm x 2). - Horn, Antler and Synthetics:
- Buffalo Horn Rollers
approx 16mm diameter x 150mm long - Antler sections
approx 55mm long. Centres marked. - Synthetics
See item for details. - JbT WoodArt©:
These pens have been turned either by myself or by Rick in our own workshop. Making pens is a time consuming process. Complex designs can involve hours of work. Even the most basic pen takes 7 individual processes and more than an hour to make.
These come in 3 sizes: Marked as pairs, including the join, these blanks are cut to fit 53-55mm tube kits. Check the lengths on the individual packs, as I now cut them a little longer to cater for the 60mm kits, and one or two old stock packets are still around...
These come in 3 sizes: 
JbT Laminated blanks for pen making.
All sizes are approximate and may vary slightly.
Unlike those who eke out every penny from every log of wood and pass
off mediocre wood as good, I do not hesitate to discard a blank which is not top quality. I have a wood burning
stove, and so what does not get sold goes to keep me warm.
I am fussy about what I sell. Very.